產品列表PRODUCTS LIST
硫化氫H2S氣體觀測管120UH HYDROGEN SULPHIDE 2-20%，為您提供硫化氫檢測管的詳細介紹和價格，我公司為提高產品質量投資上百萬元建立了檢測管自動化生產線,引進*的標準氣配置裝置,建立了嚴格的檢測管質量保證體系,并取得了計量器具生產許可證。日本光明理化學工業株式會社在氣體分析領域開拓了六十年,形成了于世的“北川"式氣體快速分析法,“北川"的歷史就是檢測管的歷史。
更新時間：2025-07-02
在線留言
硫化氫H2S氣體觀測管120UH HYDROGEN SULPHIDE 2-20%
Tube 20UH
1. PERFORMANCE
1） Measuring range ：2-20％
Number of pump strokes 1/2（50ml）
2） Sampling time ：1 minute/1/ 2 pump stroke
3） Detectable limit ：0.05％
4） Shelf life ：3 years
5） Operating temperature ：0～40℃
6） Reading ：Direct reading from the scale calibrated by 1 /2 pump stroke
7） Colour change ：Pale blue→Black
2. RELATIVE STANDARD DEVIATION
RSD-low：10％ RSD-mid.：5％ RSD-high：5％
3. CHEMICAL REACTION
By reacting with Cupric sulphate（II）, Cupric sulphide is produced.
H2S＋CuSO4→CuS
4. CALIBRATION OF THE TUBE
STANDARD GAS CYLINDER METHOD
5. INTERFERENCE AND CROSS SENSITIVITY
GAS To pump
20
18
16
14
12
10
8
6
4
2
50ml
%
????
????
????
????
????
????
120UH HYDROGEN SULPHIDE
（NOTE）
1. Where the discolouration is over the scale, non-reacted Hydrogen sulphide remains in the pump. This residual
Hydrogen sulphide is not exhausted even if the pump handle is pushed back, and it still remains in the pump.
When the handle is pulled next, it is exhausted toward the operator from the stopper side of the pump.
Accordingly, air purging of the pump inside by pulling/pushing the handle several times should be done in
fresh air where there is not Hydrogen sulphide, because Hydrogen sulphide is very toxic. During the air
purging, protection apparatus such as a gas mask should be worn.
2. Maximum sampling volume of the gas shall be approximay 70mr.
Substance Interference Coexistence
Sulphur dioxide FIG.1 The accuracy of readings is not affected. Lower readings are given.
Carbon dioxide The accuracy of readings is
not affected.
0 2 4
20
Sulphur dioxide〔％〕?
FIG.1 Influence of Sulphur dioxide
上一篇：120U硫化氫H2S氣體檢測管120U HYDROGEN SULPHIDE 0.2-6.0ppm
下一篇：120UT硫化氫H2S氣體測毒管120UT HYDROGEN SULPHIDE 2.5-40%
返回列表>>相關產品
發郵件給我們：554328895@qq.com
